v-span framless stainless steel building

The Conport Northlight Studio

Building Dimensions

Whilst these specifications are given in good faith Conport Structures reserves the right to change them without notice.


Building span	9.0 m
Building length	18.0 m
External ridge height	4.8 m
Eaves height	3.4 m
Standard door height	2.0 m
Standard door width	1.5 m
Effective floor area	162 m²
Cladding module width	1.0 m

Design

Designed in accordance with "European recommendations for the stressed skin design of steel buildings".

External Cladding

Colour coated buildings are coated with 200 Micron Plastisol finish with a life to first maintenance of up to 25 years or with white lining enamel for economy versions.

All cladding material is manufactured from "Galvatite", a hot dipped zinc coated steel. The substrate is of grade Fe E280G commercial quality mild steel with a minimum yield stress of 280 N/mm2 . Galvanised coating is to a minimum thickness of 275 g/m2 with a conventional spangle finish. The steel substrate fully complies with the provisions of British Standard BSEN 10147: 1992.

All steel is profile rolled to comply with the provisions of BS 5427: 1976 in respect of materials, design, handling, working, performance and storage.

Interior Cladding Sheet Materials

Similar to exterior cladding except that the coating is factory pre-painted white lining enamel.

Sheetwork

Main Frame hot rolled steel sections Grade 43a.
Secondary steel framework cold rolled sections.

Steel work includes:

Hot rolled Veerendahl trusses and supporting stanchions @ 3m c/c.
Cold formed sheeting rails.
Holding down bolts and erection bolts.

Protection

All hot rolled steel members shall be shot blasted to standard SA2.5 at works prior to fabrication. After fabrication one coat of good quality zinc phosphate primer shall be applied by airless spray to 75 microns nominal thickness.

All cold formed members shall be manufactured from pre galvanised strip.

Bolts

Anchor bolts shall be black and be complete with anchor plates nuts and washers. Erection bolts shall be zinc plated.

Doors

Steel insulated double hinged doors with all furniture.

Insulation

Double steel skin with sound reducing insulating quilt to meet Building regulations. Rubber strip to eliminate cold bridging.

Windows

Fixed light Double glazed widows with 4 top hung opening casements in each bay.

All quotations are subject to our terms and conditions of sale, a copy of which is available on request. Please do not hesitate to contact us for further information.

Top of page

	Features
	Window space is a massive 40% of floor area
	All interior space has the right natural light, even when subdivided with partitions
	Spacious internal cathedral ceilings run from 3.5m at the valleys to 4.8m high at the ridge
	Overall wall thickness 150mm, with thermal and acoustic insulation to clients requirements
	Can be moved and re-erected with no loss of materials
	No requirement to fireproof neighbouring buildings because of side windows
	Windows start 3.5m above ground - away from vandals
	HP200 Plastisol exterior finish is virtually maintenance free, with a life of over 40 years
	Top hung opening windows for ventilation where it is needed
	Can be erected during the holidays
	Can be erected on sites with restricted access
	Available on finance or operating lease over 5 years with payments linked to school terms
	Can be clad to fit in with any campus'

Click Here For:

e-Brochure Technical Specs

e-Brochure Photos